Iphone Unlock comming soon

http://blog.iphone-dev.org/post/1652053923/thanksgiving-with-appleUnlocke Iphone Blog

How to unlock LG U8210

សម្រាប់ការដោះកូដទូរស័ព្ទ LG U8210 (Orange Locked) សានបូរ៉ាន់ហាក់ដូចជាពិបាកបន្តិច

ទូរស័ព្ទ Model នេះមិនអាចចុច Key ដើរទេ បើដោះកូតមិនទាន់ចេញនោះ សូមណែនាំដូតតទៅ

បើដោះកូដតាម Octopus ប្រើខ្សែ USB A2 (ទិញប្រអប់ Octopus បានមកជាមួយ) ដោះបាន OK តែដាក់ SIM ចូលនៅជាប់ដដែល។
ដោះតាមប្រអប់ F-GOLD Page 1​ ដោះមិនបានទេវាថា Model នេះមិន​ទាន់ Support នៅឡើយទេ

ការសម្រេចចិត្តចុងក្រោយ ធ្វើការ Backup NV ទុកគ្រប់ប្រអប់ (Octopus និង F-Gold) រួចទាញយក

NV និង Firmware ពី F-Gold Support Site រួចសរសេរ Firmware ចូលតាម F-Gold បន្ទាប់មកសរសេរ NV ចូលទៀត

តែនៅតែមិនអាចដោះកូដបាននៅឡើយ ក្រោយមកកទាញយក Octopus មកធ្វើការ Repair NV និង Restore Factory ដាក់ SIM ចូលក៏បានសម្រេចភ្លាម

សូមទាញយក Driver LG U8XXXពីទីនេះ

http://www.4shared.com/file/GKqeAHwq/lg_8210_old_serial.html

E2120 ចេញរលត់

 តាមធម្មតា Samsung ច្រើនបើកចេញ Model របស់វារលត់ Restart​ទៅមកៗនេះមកពីវាបាត់ File TFT

នេះជា File សរសេរតាមប្រអប់ណាកបាន

http://www.4shared.com/file/D2UYYwsM/E2120_free.html

ATF បាត់ភ្លើងបៃតង ATF LOST GREEN LIGHT

សម្រាប់ប្រអប់ ATF ដែលបាត់ភ្លើង ពណ៏បៃតង មិនបាច់ពិបាកចិត្តនោះទេ សូមធ្វើតាមរបៀបខាង
ក្រោម ។
១​ យកប្រអប់ MT មកដោះយក IC DC TO DC CONVER +9VDC (FOR VPP IN MT-BOX)
២ ស្វែងរក DIODE HIGH FREQUENCY RECTIFY តាម ម៉ាស៊ីនទូរទស្សន៏ចាស់ៗ មកដាក់ជំនួស Diode
   ដែលខូច
៣ រៀបសេម៉ាជំនួយ អាំពារភ្លើង ដើម្បីចិញ្ចឹមទូរស័ព្ទពេលសរសេរ ពិសេស គឺ BB5 (N95)។ល។
     សូមមើលរូបខាងក្រោម

Upgrade Iphone to 4.1 saft unlock

100% solution to upgrade 3G 3GS 4G to 4.1 without upgrading the baseband (windows)

---

i am going to share 100% solution tested by me to upgrade to 4.1 without having anything effect on the baseband
you can use it even the phone is on stuck on recovery loop or on apple logo after erasing all contents :

use the latest version of redsnow i.e. 0.9.6b2

download it from here:

Redsnow

and download the stock original firmware 4.1 for the phone here:

Iphone 4G

Iphone 3GS

Iphone 3G


Step 1 ::

First you need to open Redsn0w 0.9.6b2 in Windows. The first screen will have you browse for your firmware file. You should navigate to the FACTORY firmware file that you downloaded. I don’t know why but they didn’t include the option to enter Pwned DFU mode on the first screen of Redsn0w so you have to select a factory firmware file to bypass this part of the process

Step 2::


After you have selected the factory firmware file that you downloaded, if you have an iPhone 3Gs it will ask you whether you have the old or new(patched) model. If you have the new(MC) model then select “YES” this is VERY important, if you have the new model and you select no you will have to restore with a factory 4.1 firmware file which will take away the possibility to jailbreak. (To identify if you have MC or Non MC model, go to Settings – General – About and scroll down to Model. If it’s MCXXXX then you have new (MC) model. If it’s something like MBXXXX, then you have old (non MC) model.)

Step 3::

Now click “next” and you will see Redsn0w apply kernel patches to the IPSW you selected.

Step 4::

On the next screen is where you’re gonna have a few different options. You may see more options than what are shown below, the important thing is that you want to select ONLY the option which is “Just enter pwned DFU mode right now” This option is basically doing what the DFU button in Pwnage Tool for Mac users does.

Step 5::

This is another CRUCIAL step, I cannot stress enough that you should ALWAYS read instructions carefully and make sure you are doing things right. Please power off your device while the device is plugged into the computer. DO NOT click “next” until your device is both powered off AND plugged into the computer.

Step 6::

This is a step we should all be quite familiar with, now we have to put the device into DFU mode. Just follow the on-screen instructions exactly how they are displayed and you will be fine.

Step 7::

If for whatever reason things get screwed up and you didn’t follow the instructions correctly you will see a screen like the one below. If that is the case please start over and read carefully, if you do not see a screen like the one below please continue to the next step!

Step 8::

Alright, we are nearly there! Congratulations on making it this far! We are but mere minutes away from having a jailbroken 4.1 device with the old(unlockable) baseband! After Redsn0w detects your device in DFU mode it will begin processing again and you will see it applying the Limera1n exploit to your device.

Step 9::

Alright, you are all set to restore your custom firmware! After you have applied the Limera1n exploit, you should see the screen below informing you that you should now be able to shift+restore in iTunes to restore with a custom firmware file. Click “Finish”

Step 10::

Now download the custom firmware for your phone and restore it
(using shift and restore)

Download the custom acitavted firmwares from here :

Iphone 4G

Part 1

Part 2

Part 3

Iphone 3GS

Part 1

Part 2

Iphone 3G

Part 1

Part 2

And you got the phone upgraded with the baseband intact

ប្រអប់ Ns-Pro មានUSB ខាងក្នុង

ក្រោយពីទទួលបាន Samsung S5230 សម្រាប់ធ្វើការដោះកូដ ខ្ញុំបានព្យាយាម Connect តាម ខ្សែ USB

ដែលបានភ្ជាប់មកជាមួយប្រអប់ Z3X (E210 USB+COMP) តែមិនបានសម្រេចសោះ ព្រោះ

តែវាមិនស្គាល់​ Driver ទោះបីតភ្ជាប់ជាមួយ Main Board Usb ឬ Usb ជាប់ហ្នឹងប្រអប់ Z3X ក៏ដោយ ។

ពេលនោះខ្ញុំបានសម្រេចចិត្ត យក Ns-pro មកដោះវិញ (កាលទិញប្រអប់ NS-PRO មកមិនបានមានខ្សែ

USB មកជាមួយនោះទេ) ប្រើតែ Rj45 ភ្ជាប់និងប្រអប់តែវាបានអានតែ DATA រួចវាឲ្យបើកទូរស័ព្ទបន្ទាប់

មកដោត USB ចូលតែវានៅតែមិនស្គាល់ដ៏ដែល ខ្ញុំបានសម្រេចចិត្តកែខ្សែ ដោយកាត់ខ្សែ E210​ដែលភ្ជាប់មកជាមួយ NS-PRO BOX ​រួចតសាឡើងវិញដូចរូបខាងក្រោម             

ការដោះកូតរបស់ខ្ញុំបានជោគជ័យដោយការកែខ្សែ ។ សរុបទៅមានន័យថា ក្នុងប្រអប់ NS-PRO មាន USB HUB ចេញទៅកាន់ទូរស័ព្ទជាស្រេច គ្រាន់តែ គេមិនតភ្ជាប់ឲ្យយើង

​                                                                  ការដោះកូដ SAMSUNG 
​                                          ប្រអប់ NS-PRO ខ្សែដែលបានកែដូចរូបខាងលើ

MT Box Nokia BB5 SL20 RPL module activation

MT Box Nokia can be extended with BB5 SL20 RPL module.  ប្រអប់ MT Box Nokia អាចបន្ថែមជា​BB5 SL20 RPL module.​This allow you unlimited unlock for new BB5 SL20 phones without test point or server credits.​ការនេះផ្តល់ឲ្យអ្នកនូវការដោះកូដសម្រាប់ ទូរស័ព្ទថ្មីBB5 SL20 ដោយមិនបាច់ប្រើ Test Point ឬក
Server។ Activation can be done very easy and take about 1 minute for complete operation. ការActivateអាចធ្វើទៅបានដោយងាយគឺត្រូវចំណាយពេលប្រហែលតែមួយនាទីករួចរាល់
To activate this module you need to have GT server, MT Box PRO or SL20 Box Account with enough amount of credits.
Module activation will be paid with credits from your GT server, MT Box PRO or SL20 Box Account. Credits needed for activation:

• If box already activated for BB5+ – 20 credits
• If box has no BB5+ module activated – 50 credits

SL20 module activation grants you:

• Free unlock for all SL20 supported phones
• Free SD repair for all supported BB5 phones
• Free unlock for all DCT4+ supported phones
• Free unlock 1202, 1661, 1662, 5030 and other phones with same security

How to activate “StandAlone BB5 SL20 RPL” module for MT Box Nokia using GT  server, MT PRO (user name and password account type):

• Visit the link: http://www1.gtibox.com/support/bb5sl20rpl.php
• Enter your MT Box serial number – SN
• Enter your GT server or MT PRO user name
• Enter your GT server or MT PRO password
• Select – I want to use this server account to enable MT-Box serial number specified above for StandAlone BB5 SL20 RPL Activation!
• Click to Activate BB5 SL20 RPL button
• Download MT Tool
• Connect your MT box to USB
• Run MT Tool.exe from directory where is MTB_NK.EXE (i.e. where is located file griffin.ini in most cases C:\Program Files\GriffinTeam\MT-box) and click button ‘Update’.
• Do not use MT Box update tool v3.13 or older because will not work

How to activate “StandAlone BB5 SL20 RPL” module for MT Box Nokia using “Box Account” (SL20) credits:

• Download and install MT box update tool
• Connect your MT box to USB
• Start MT box update tool v3.17 (do not use older version because will not work)
• Press INFO button, software will read your MT box information
• Press “Check Activation” button
• Software will connect to GT server and show you all available module activations
• Select desired module activation and press OK button
• If you have enough credits on your “Box Account” (credits info is shown on top of window) activation will be done in just few seconds
• If you does not have enough credits on your “Box Account” need to order it from your reseller

How to order “Box Account” credits:

• Download and install MT box update tool
• Connect your MT box to USB
• Start MT box update tool v3.17 (do not use older version because will not work)
• Press INFO button, software will read your MT box information
• Press GET SN button, box sn is now copied to clipboard
• Paste your MT box serial number to order form, email or IM (depend which way your reseller use for “Box Credits” order)
• Reseller need to inform you when your MT box is recharged with new amount of credits or you can check by your self by pressing Info button in MT tool

How to activate SL20 module on your MT box in just few mouse clicks.
Please check the video manual in full screen mode for best view.

Methome WP626N សេរីថ្មីមាន Imei ចម្លែក

កាលពីពាក់កណ្តាលខែ តុលាឆ្នាំ២០១០ ក្រុមហ៊ុន Metfone បានបន្ថែមប្រពន្ធសុវត្តិភាពបន្ថែមទៀត
ទៅលើ Methome គឺបន្ថែម IMEI ពិសេសដើប្បីឲ្យស្គាល់តែស៊ីមរបស់វាមួយមុខប៉ុណ្ណោះ ។
នៅលើបន្ទះ SIM មានសរសេរអក្សរថា Interlock គឺមិនអាចយកស៊ីមនេះទៅដាក់ទូរស័ព្ទធម្មតាបាន
ឡើយ រួចទូរស័ព្ទកឈប់ចាក់សោដែរ បើកចំហរតែបើដាក់ SIM ផ្សេងវាមិនមានសេវាសោះ ។
ទូរស័ព្ទនេះបើយកទៅដោះតាមរយះ សរសេរ Flash Patch ដែលសានបូរ៉ាន់បានធ្វើជាមួយ Hack3r2k
អាចដាក់ SIM ផ្សេងបានមានសេវាធម្មតា តែមិនអាចដាក់ SIM ដែលជាប់ហ្នឹងវានោះបានទេ (អត់សេវា)
សានបូរ៉ាន់បានបរិចាកស្រាបៀរ មួយដបឲ្យ Hack3r2k គាត់បានកែ Flash File រួចឲ្យសរសេរសាក
ល្បង តែមិនបានសម្រេចទេ ។

http://www.hack3r2k.com/WP626_VTL_CAM_WP623GXNV1.0.2B02.bin

របៀបដោះកូដ W450 How to unlock motorola w450

First Install Motorola Locosto Driver
LOCOSTO DRIVER DOWNLOD
ដាក់ថ្មចូលមិនបាច់ចុចបើកទេ